Frequently Asked Questions
How does the ASBpro work?
The ASBpro uses light reflection to analyze materials directly and non-destructively without the need for sample preparation. The measurement results are evaluated via an app and displayed as clear results using traffic-light colors (“Asbestos detected,” “No asbestos detected”).
Is user training required?
Yes. Participation in a user training session is mandatory before using the ASBpro for the first time. The training covers how to operate the device, how to interpret the results, and important information about how the technology can be used and its limitations. Training sessions are scheduled by appointment.
How quickly does the scanner display a result?
The analysis is performed in real time. The ASBpro provides results in under 10 seconds.
Does the measurement require a sample to be taken?
No, the analysis is performed non-destructively directly on the material. This reduces potential hazards associated with sampling.
Can I use the ASBpro to carry out clearance testing?
No, because the ASBpro is a rapid screening system for the on-site detection of materials containing asbestos. It is designed for rapid risk assessment and to assist with material classification. However, it is not intended for clearance testing or post-removal testing following asbestos removal work.
What materials is the ASBpro suitable for?
The ASBpro was developed for the analysis of building materials that may contain asbestos, such as those found in existing buildings, demolition projects, recycling plants or during refurbishment work. Examples include asbestos concrete, Florflex and Eternit panels, and rough plaster and spacers.
Is a laboratory analysis unnecessary?
If the ASBpro detects that a material contains asbestos, it may be classified as containing asbestos in accordance with the *LAGA guidelines described. In such cases, an additional laboratory analysis is often not required for the sample in question.
*Guidance on the disposal of waste containing asbestos in Germany.
Does the ASBpro replace a laboratory analysis for testing the absence of asbestos?
No, because the ASBpro is a rapid screening system for on-site classification. Only an accredited laboratory analysis can confirm whether a material is asbestos-free.
Does ASBpro support the requirements of TRGS 519?
Yes, because ASBpro can support the risk-based classification of materials in accordance with TRGS 519, providing a quick decision-making aid on site.
Is specialist knowledge of spectroscopy required to operate the device?
No, because the results are displayed in a simple red-green format. This means that the device can be used safely by anyone, even those with no knowledge of spectroscopy.
Does the ASBpro require regular calibration?
No, it requires no maintenance or calibration. After switching it on, the user simply needs to perform a white balance. The scanner will prompt the user to do this automatically once the app has started. The white standard to be measured is included in the case.
Can the ASBpro be used for dark or black samples?
In most cases, the answer is no, since NIR technology is based on light reflection. Very dark or black materials reflect very little light, so cannot be analysed reliably. However, the app automatically alerts users when samples are too dark.
Can the app be used without an internet connection?
Yes, the ASBpro app can be used offline. This makes it ideal for use on building sites and in other areas with no mobile network coverage.
Can the measurement results be documented?
Yes, the app records measurements and allows you to create automated PDF reports. These reports include the spectrum, a photo of the sample, the geolocation and the measurement data.
Is the reference database updated?
The reference database is updated on an ongoing basis. When the smartphone connects to the internet via Wi-Fi, the update is downloaded automatically. The updates are free of charge.